ITS-AX1 barrier gate control radar is developed for the entrance and exit management of parking lots or underground garages. It can precisely control the rising and falling of the barrier boom by cooperating with the main control board of the gate control system, which could effectively avoid the ''accidental injury'' of the barrier boom to the passing vehicles or pedestrians in the radar field of view,and realize intelligent anti smashing.
ITS-AX1 radar adopts the highly integrated RF chip SOC scheme, which has the characteristics of small size, low cost, all-weather working capability, high detection
sensitivity, high precision, easy to debug&installation, very good stability and reliability.
The working frequency of the radar is 79GHz, with Linear Frequency Modulation and Continous Waveform, which makes the available bandwidth up to 4GHz. The range resolution is up to 4cm, and ranging accuracy is better than 2cm. The radar antenna adopts MIMO array antenna that enables the radar good angular resolution and high angle measuring accuracy. The onboard signal processing and control unit apply the DSP&ARM dual core architecture. Through the joint optimization design of software and hardware, this product can accurately identify and distinguish the pedestrian, vehicle and other targets passing through the barrier boom area, and avoid the accidents of ''smashing the vehicle'', ''smashing the person'' and ''not dropping the barrier boom''.
ITS-AX2 Barrier Gate Anti-collision Radar
ITS-AX2 barrier gate control radar is developed for the entrance and exit management of parking lots or underground garages. It can precisely control the rising and falling of the barrier boom by cooperating with the main control board of the gate control system, which could effectively avoid the ''accidental injury'' of the barrier boom to the passing vehicles or pedestrians in the radar field of view,and realize intelligent anti smashing.
ITS-AX2 radar adopts the highly integrated RF chip SOC scheme, which has the characteristics of small size, low cost, all-weather working capability, high detection
sensitivity, high precision, easy to debug&installation, very good stability and reliability.
The working frequency of the radar is 79GHz, with Linear Frequency Modulation and Continous Waveform, which makes the available bandwidth up to 4GHz. The range resolution is up to 4cm, and ranging accuracy is better than 2cm. The radar antenna adopts MIMO array antenna that enables the radar good angular resolution and high angle measuring accuracy. The onboard signal processing and control unit apply the DSP&ARM dual core architecture. Through the joint optimization design of software and hardware, this product can accurately identify and distinguish the pedestrian, vehicle and other targets passing through the barrier boom area, and avoid the accidents of ''smashing the vehicle'', ''smashing the person'' and ''not dropping the barrier boom''.
ITS-AX3 Barrier Gate Anti-collision Radar
ITS-AX3 barrier gate control radar is developed for the entrance and exit management of parking lots or underground garages. It can precisely control the rising and falling of the barrier boom by cooperating with the main control board of the gate control system, which could effectively avoid the ''accidental injury'' of the barrier boom to the passing vehicles or pedestrians in the radar field of view,and realize intelligent anti smashing.
ITS-AX3 radar adopts the highly integrated RF chip SOC scheme, which has the characteristics of small size, low cost, all-weather working capability, high detection
sensitivity, high precision, easy to debug&installation, very good stability and reliability.
The working frequency of the radar is 79GHz, with Linear Frequency Modulation and Continous Waveform, which makes the available bandwidth up to 4GHz. The range resolution is up to 4cm, and ranging accuracy is better than 2cm. The radar antenna adopts MIMO array antenna that enables the radar good angular resolution and high angle measuring accuracy. The onboard signal processing and control unit apply the DSP&ARM dual core architecture. Through the joint optimization design of software and hardware, this product can accurately identify and distinguish the pedestrian, vehicle and other targets passing through the barrier boom area, and avoid the phenomena of ''smashing the vehicle'', ''smashing the person'' and ''not dropping the barrier boom''.
ITS-TX1 Parking Trigger Radar
ITS-TX1 trigger radar is developed for the entrance and exit management of parking lots or underground garages.It can detect whether there are typical
targets such as cars, pedestrians and electric vehicles in the entrance and exit area under various complex environments, so as to guide the camera system
to complete the function of vehicle identification; ITS-TX1 radar adopts highly integrated scheme, which has the characteristics of small size, high precision,
simple debugging and installation, high stability and so on.
ITS-TX1 radar works in 77-81GHz band, with a bandwidth of 4GHz, range resolution 4cm and range accuracy 5cm; MIMO radar antenna enables the
radar a high angle measuring accuracy. signal processing and control unit apply the DSP&ARM dual core architecture. and runs advanced algorithms such
as radar data processing, target detection and target recognition on the high-speed digital signal processor inside the processor on chip. It can accurately
identify and distinguish people, vehicles and other targets in the parking area, and guide the camera system for license plate recognition.
Features:
Bluetooth mode,Mobile APP debugging
Advanced surge/shielding and protection functions
Imported chips and imported raw materials
Automotive grade components
IP66 waterproof
Suitable for all boom types
No need to cut the road and bury the coil during installation (No surfacing work necessary)
Relatively cost saving compared to other products
System properties
Shell Size: 107.9*73.6*17.2mm
Detection range Along Lane Width: Default±0.5m (configurable within ±1.5m)
Upgrade or debugging
Working Voltage: 9-24V(12V/1A preferred)
Waterproof Level: IP66
Operating Temperature: -40℃ - 85℃
Power Consumption: < 2.5W
Connection Interface: RS485/Bluetooth
Online Debugging: Serial Port / Bluetooth Debug
Online Update: Serial Port / Bluetooth Upgrade
Cross Lane Range: Default 3m (configurable within 6m)
The application case:
Ramp
Double gate
Rainy day
Application:
Barrier boom type such as Straight , Fence, Billboard, Airborne
Sliding Gate
Video:
AfghanistanKabulAfghanestan افغانستانKabul
كابل Åland IslandsMariehamnÅland
AhvenanmaaMariehamn Maarianhamina
AlbaniaTiranaShqipëriaTirana AlgeriaAlgiersDzayer
ⴷⵣⴰⵢⴻⵔ Al-Jazā'ir
الجزائرDzayer ⴷⵣⴰⵢⴻⵔ
Al-Jazā'ir الجزائر
American SamoaPago PagoAmerika Sāmoa
American SamoaPago Pago Pago Pago
AndorraAndorra la VellaAndorraAndorra la Vella
AngolaLuandaAngolaLuanda AnguillaThe ValleyAnguillaThe Valley
Antigua and BarbudaSaint John'sAntigua and BarbudaSt. John's